CQUARTZ - DLUX (Ceramic coating for wheels and plastics)

Regular price $54.95
Sale price $54.95 Regular price
Shipping calculated at checkout.

Pickup available at 9400, rue John-Simons

Usually ready in 1 hour

CQUARTZ - DLUX (Ceramic coating for wheels and plastics)

30ml *PRE-ORDER*
  • 9400, rue John-Simons

    Pickup available, usually ready in 1 hour

    9400 Rue John-Simons
    Québec QC G2B 0S9


Applications like this stand up to a lot of abuse, so CQUARTZ DLUX is thicker protection than conventional CQUARTZ coatings and 50% silica content by volume.

 When applied to plastic and rubber trim, CQUARTZ DLUX helps restore their shine and color and protect them from future fading. 

On painted, polished or chrome wheels, CQUARTZ DLUX resists brake dust and road grime, reducing the need for dedicated cleaners.

Preparation for plastic:

  • Make sure the surface is cool and dry. (Do not apply to hot surfaces or in direct sunlight.)
  • Rub the surface with MultiX 1:20 and a microfiber towel.
  • Rinse while agitating with a microfiber towel to remove all APC residue.
  • Dry the surfaces
  • Wipe the surface with CARPRO Eraser , wipe it dry, then allow the plastic to evaporate 20 minutes before application.

Application instructions on plastic and wheels:

  • Wet the applicator with a strip of DLUX and spread evenly over a small area at a time.
  • When applying, it is VERY important to work in an area as you go.
  • Start in a corner and practice! / Don't tackle a large area at once.
  • Apply gently and evenly as you go. Don't try to spread it too thin, but be sure to work it to an even layer in the first minute before moving on to the next overlapping area. After a minute, you should not go back to this area.
  • On the textured trim, don't wipe it on, just be sure to apply it evenly as mentioned. On smooth plastic, you need to wipe it off before it gets too sticky. This results in a thinner coat that doesn't last as long, but on some smooth plastics there isn't an easy way to apply it evenly.

Instructions for paint and chrome:

  • Wash well.
  • Decontaminate with Iron X.
  • Surface polished as required with Metallicut
  • Wipe with CARPRO Eraser.

Instructions for the wheels:

  • Wash well.
  • Decontaminate with IronX .
  • Polish the surface with CARPRO essence
  • Wipe with CARPRO Eraser.


  • Leave to harden for 1 to 3 hours without introducing water to the surface. If it gets wet in the first 24 hours, wipe off the water before it dries on the surface as a precaution.
  • After 3 days, you are free to wash with all your usual CARPRO products.
  • Avoid contact with skin and eyes.
  • Wearing gloves.
  • Do not use it for any other purpose.
  • Keep out of reach of children and heat.
  • Do not ingest.

CQuartz Maintenance

1. Wash regularly with CARPRO RESET

2. Wash Mitt:

CARPRO MITTEN (Recommended for daily drivers and most cars - This glove is the easiest to maintain and is extremely durable and washes easier)      

Merino wash mitt (recommended if the car has extremely soft paint or the car is not extremely dirty).      


4. Quick detail: CARPRO Ech2o 1:15 or Elixir and CARPRO BOA Microfibers (need about 3-6 towels). 

5. Occasionally (every 3-6 months) Decontaminate surface with CARPRO IronX. Use during the wash cycle (Before CARPRO Reset) and as directed.      

6. You can use CARPRO Reload Or Hydro2 every 3 to 12 months.