• New updated formula with stronger acids
• Effectively breaks down mineral deposits
• Safe to use on a variety of surfaces

Paint :

• Wash the vehicle with Reset, rinse and dry the paint.
• Work indoors or in the shade on cool panels. Have 2 damp terry cloth towels ready.
• Spray Spotless 2.0 directly onto the panel or into 1 damp terry cloth towel and spread over the affected area.
• Wait 30 seconds to 1 minute for Spotless 2.0 to break down the surface minerals before wiping the affected area to help loosen mineral deposits.
• Do not allow the chemical to dry on the surface, wipe with a 2nd damp terry cloth towel or reapply Spotless 2.0.
• Repeat if necessary.
• After cleaning each panel, rinse it thoroughly under running water and dry it before moving on to the next panel.

Emblems and wheels:

• Clean the area with Reset, rinse and dry the surface.
• Always test on an inconspicuous area first. Spray Spotless 2.0 onto an applicator, microfiber or brush of your choice and apply to the affected area 1 section at a time.
• Allow Spotless 2.0 to sit on the affected area for 30 seconds to 1 minute without letting it dry before shaking to help break up mineral deposits or stains.
• Repeat if necessary.
• Rinse thoroughly with running water after cleaning each area and pat dry.

Textured plastics:

• Clean plastics with Reset, rinse and dry.
• Spray Spotless 2.0 directly onto textured plastic or apply to a damp microfiber towel and wipe liberally over the surface to allow it to penetrate into the pores.
• Allow Spotless 2.0 to sit for 30 seconds to 1 minute to break down mineral deposits and contamination before using a finishing brush to agitate and remove contamination from pores.
• Repeat if necessary.
  Rinse thoroughly under running water after cleaning each section and dry.

Glass :

• Apply Spotless 2.0 to a terry cloth towel and spread it over the glass, leaving it to act for 30 seconds to 1 minute.
• Use the same terry cloth towel to polish the glass to agitate the minerals or for stubborn water spots, apply a little Spotless 2.0 to a polishing pad and machine or hand polish the glass.
• After removing stains, rinse the glass and adjacent panels thoroughly with running water or wash with car shampoo and dry.