ECH2O is an all new waterless cleanser and shine enhancer based on 2 years of research and development!
It has been designed to work in harmony with ceramic coatings and even allows easy cleaning of unsealed or waxed surfaces!
Based on a SiO2 hybrid framework and an eco-friendly organic lubricant solution, ECH2O safely cleans and polishes a variety of vehicle exterior surfaces with ease!
Paint and chrome take on a whole new level of shine and reflection with this incredible formula and best of all, it's easy to use even in extreme heat and direct sunlight on painted surfaces!
Our solution offers a waterless, swirl-free, eco-friendly experience and is a blend of proprietary washing agents combined with natural organic extracts and lubricants.
The secret to ECH2O's safe cleaning capabilities is a combination of its modified high-gloss SiO2 component and its innate cleaning capabilities, which easily removes dust and light dirt while leaving a smooth, glass-like surface!
Paired with a quality microfiber towel, the lubricants help to safely remove larger particles from the surface while the remaining ECH2O solution becomes an active cleaner on the surface and begins to loosen any particles that were left behind.
Before the final step (indicated in the product instructions), the solution may dry to a fine mist indicating that it is ready to wipe away any remaining product effortlessly!
As a quick wax:
- Shake the product well
- Spray, spread the product on surfaces, wipe completely using a second microfiber.
As a waterless cleaner:
- Shake the product well
- Spray a generous amount over a full panel.
- Wipe the surface with minimal pressure, gently, using a CarPro Boa microfiber. Switch sides regularly to work as often as possible with a clean side of your microfiber.
- Spray again on the surface.
- Using a new BOA Microfiber, wipe the surface again to remove any residue and remaining dirt still on the panel.
- Move on to the next panel, repeat steps 2-5 until the car is complete.
- Wipe the vehicle again, if necessary, using a new, clean microfiber cloth.
As a clay bar lubricant:
- Shake the product well
- Spray on the surface and go over with the clay bar
As a solution for no-rinse washing:
- Mix 10-15 litres of water with 60-90ml of Ech2o in a bucket with a GritGuard boiler base.
- Fill another 20 litre bucket with GritGuard boiler base and only water.
- Submerge your microfiber in the solution.
- Fold the laundry in half and slowly and without pressure drag your laundry over 1/4 of a panel.
- Change your cloth to the other side and make a few passes over the next 1/4 panel. Always slowly and without pressure.
- Fold your laundry to find two new clean sides and repeat to clean the entire panel, using each of the 4 sides for each 1/4 of the panel to be cleaned.
- Use a new cloth, also previously submerged, and use it to go over the entire panel to carry out a final cleaning step.
- Use a SOFT, DRY cloth to dry the panel completely before moving on to the next panel.
- Clean your dirty microfibers in the water-only rinse bucket and re-submerge your cloths (or use new microfiber cloths) in the cleaning solution, repeating steps 3-8.
