CQUARTZ - Skin (Ceramic coating for PPF)

Regular price $104.95
Sale price $104.95 Regular price
PRÉCOMMANDE
EXPÉDITION SEMAINE DU 29 JUILLET
Shipping calculated at checkout.

Pickup available at 9400, rue John-Simons

Usually ready in 1 hour

CQUARTZ - Skin (Ceramic coating for PPF)

  • 9400, rue John-Simons

    Pickup available, usually ready in 1 hour

    9400 Rue John-Simons
    100
    Québec QC G2B 0S9
    Canada

    +14188474747

CQUARTZ Skin has been developed for application over a wide variety of paint protection films, vinyl films, clear stone guards.

Paint protection films and plastics are the sun's biggest enemy of UV rays, which is why CQUARTZ SKIN was designed from the ground up with heavy duty UV blockers! With UVA and UVB resistant particles imbued into CQUARTZ SKIN's nano structure, you can be assured you've provided the best possible protection for your wrapped and plastic surfaces!

CQUARTZ SKIN also offers resistance to most chemicals, salt and environmental damage as well as excellent UV protection! This highly specialized nano-ceramic adds a rich appearance to the surface with incredible resistance to water, dirt, and rugged durability that can last for years!

When it comes to matte and satin films, as well as plastic parts, a BIG challenge with using ceramic coatings has always been the high risk of applying to a surface you can't polish.

With CQUARTZ SKIN, this challenge has been solved!

If a mistake is made or the coating is damaged or needs to be removed for any reason, you can simply remove it with the chemical solution...no abrasives or polishing necessary!

CQUARTZ SKIN applies easily over properly prepared surfaces and can even be used on matte and satin wraps when used as directed!

It features ease of use in all climates, applying and wiping off easily for anyone trained in coating application.

Directions:


  • Prepare the surface 100% oil and contaminant free
  • Apply Cquartz Skin to the surface in an even criss-cross layer.
  • Work in the SKIN to be flat without Highspot.
  • Let flash for 2-3 minutes and wipe off.

For best performance do 2 coats, 2nd can be applied after 4 hours or immediately if cured with IR lights (if applicable).


Keep out of the elements for 24 hours.


Do not subject to chemicals for 3 to 5 days minimum.


Precautions:

  • Do not use on a surface that cannot be polished until you have mastered the correct application and have proper lighting to do so.
  • Do not apply to any surface that is not 100% clean and oil free.
  • Adheres better to PVC, PU and TPU films/packaging.
  • Do not apply in direct sunlight or on a hot surface.      
  • Do not reuse applicators
  • Do not reuse the towels you used to buff the paint.      
  • Wear gloves   
  • Wear respiratory protection such as a painter's mask. 




AVAILABLE IN: 50ML