NEW MTM Hydro PF22 Foam Cannon

PF22 FOAM CANNON: NEW AND IMPROVED DESIGN WITH LARGE APERTURE.

What's new?

Introducing a revolutionary improvement to the PF22.2 Foam Cannon: an all-new, easy-to-use wide-mouth bottle.

Other upgrades include a quick-connect adapter and weighted stainless steel filter.

Your feedback is important and we have heard your requests loud and clear. The improved design is designed to make your foam cannon experience even more convenient and user-friendly.

MTM Hydro's Italian-made PF22.2 Foam Cannon is the new standard in the foam industry and stands as the most reliable foam cannon in the industry!

With its new bottle, you no longer have to worry about spills and spills.

Whether you foam your car on the weekend or are a cleaning professional, this tool will save you time and money.

Simply attach the foam cannon to your pressure washer using one of the included fittings, fill with the desired ratio of soap product to the bottle!


Additional Information

A specific 1/4" male plug may be required to attach the QC plug to the end of some residential pressure washer configurations. MTM Hydro 1/4" plugs are standard for industrial use, but many pressure washers residential such as Generac, Greenworks, Ryobi, AR Blue Clean, etc... have some models where the coupler will not receive an MTM plug.

Not all of these brands are affected, only certain models. If you look closely, the chamfer on the end of an MTM cap as well as the neck is 1.5mm shorter than some couplers may allow.

Contents of the PF22 foam cannon kit:

• Nickel-plated Italian brass - One-piece foam cannon body
• New 32 oz Italian calibrated gray bottle
• 1/4" x 9" tube for drawing chemicals
• 3.5 (1.25 mm) port installed in the aerator body
• 3.0 Port (1.1mm) included with kit
• Fitting set (2 pieces) containing 1/4" M22 adapter and 1/4" QC plated steel plug
• Manual with maintenance instructions and exploded view

Specifications:

• Min. 1100 psi - Max. 5,000 psi
• Min. 1.4 gpm - Max. 5.3 gpm
• Max. 140°F

Noticed:

The full spectrum of ratings is not supported by the 3.5 or 3.0 ports included with this kit.

Other orifices may be needed for higher flow machines that have a lower PSI - Example: 2000 PSI with 3.5 GPM requires a 5.0 orifice.

For larger orifices, you will know this does not work because you will experience the foam cannon starting and stopping as your unloader slides in and out of the bypass.

You will also get aqueous foam because the 3.5 port size is significantly smaller than the 5.0 needed for your machine. MTM foam cannons will not work with flow sensing unloaders because you will get the same results as shown for an undersized orifice.