Tired of spending countless hours correcting poorly maintained paint?
CARPRO has spent the last few years developing a brand new, fast-acting "heavy cut" compound that is unlike any other polish on the market.
ClearCut thus becomes a new first step for correcting major paint defects. You can then finish your correction with a final-step polish, like CARPRO Reflect!
CARPRO ClearCut was developed to RAPIDLY remove defects, allowing you to see the results as you work the product. After 1 to 2 passes, you will already see defects being corrected as the product becomes transparent. This allows you to continue cutting as needed, or stop to move on to the finishing step.
In some cases, and with the right technique, it is even possible to push the compound's work (high pressure and low speed) to minimize abrasive particles and thus complete a single correction step for a flawless result.
CARPRO ClearCut is an extremely fast-acting abrasive liquid designed for efficiency, performance, and speed. Unlike other product lines that promise impeccable correction while concealing defects only for them to reappear later, CARPRO ClearCut contains no fillers.
It removes very easily, and a spray of CARPRO Eraser will easily remove any lubricant from the formula to prepare your surface for the next step.
Unlike polishes of the past, ClearCut has its own usage method and reverses the usual process for optimal results.
Start with light pressure and finish with strong pressure on the polisher for the final touch!
AVAILABLE IN 250ml, 500ml, 1L, and 4L
- Next-generation polish
- Cuts RAPIDLY!
- Saves you time
- No fillers
- Very low dust
- Removes P1000 grit and higher
- Safe for use in body shops.
- Compatible with dual action and rotary polishers.
- Compatible with all types of foam, wool, and microfiber pads.
- Prime your pad (dry and clean) with a small line of polish in the center of the pad and add 3-4 drops of product (pea-sized).
- Spread the product over the section to be worked.
- Use HIGH speed and LOW pressure.
- With MINIMAL pressure for the first 2-3 passes, then add pressure to the polisher for each new pass.
- Increase pressure with each pass, finishing with the highest pressure.
- When scratches are no longer visible, or when the polishing work is complete, wipe off residues with a microfiber, such as CARPRO's 2Face.
- For the next section, reapply 6 to 8 drops to your pad and repeat steps 2 to 7.
Tired of spending countless hours correcting poorly maintained paint?
CARPRO has spent the last few years developing a brand new, fast-acting "heavy cut" compound that is unlike any other polish on the market.
ClearCut thus becomes a new first step for correcting major paint defects. You can then finish your correction with a final-step polish, like CARPRO Reflect!
CARPRO ClearCut was developed to RAPIDLY remove defects, allowing you to see the results as you work the product. After 1 to 2 passes, you will already see defects being corrected as the product becomes transparent. This allows you to continue cutting as needed, or stop to move on to the finishing step.
In some cases, and with the right technique, it is even possible to push the compound's work (high pressure and low speed) to minimize abrasive particles and thus complete a single correction step for a flawless result.
CARPRO ClearCut is an extremely fast-acting abrasive liquid designed for efficiency, performance, and speed. Unlike other product lines that promise impeccable correction while concealing defects only for them to reappear later, CARPRO ClearCut contains no fillers.
It removes very easily, and a spray of CARPRO Eraser will easily remove any lubricant from the formula to prepare your surface for the next step.
Unlike polishes of the past, ClearCut has its own usage method and reverses the usual process for optimal results.
Start with light pressure and finish with strong pressure on the polisher for the final touch!
AVAILABLE IN 250ml, 500ml, 1L, and 4L
- Next-generation polish
- Cuts RAPIDLY!
- Saves you time
- No fillers
- Very low dust
- Removes P1000 grit and higher
- Safe for use in body shops.
- Compatible with dual action and rotary polishers.
- Compatible with all types of foam, wool, and microfiber pads.
- Prime your pad (dry and clean) with a small line of polish in the center of the pad and add 3-4 drops of product (pea-sized).
- Spread the product over the section to be worked.
- Use HIGH speed and LOW pressure.
- With MINIMAL pressure for the first 2-3 passes, then add pressure to the polisher for each new pass.
- Increase pressure with each pass, finishing with the highest pressure.
- When scratches are no longer visible, or when the polishing work is complete, wipe off residues with a microfiber, such as CARPRO's 2Face.
- For the next section, reapply 6 to 8 drops to your pad and repeat steps 2 to 7.
10%
Product title
Vendor
$19.99 | $24.99
Product title
Vendor
$19.99 | $24.99
Product title
Vendor
$19.99 | $24.99
Product title
Vendor
