CQUARTZ - Gliss (Ceramic overcoating)

Format
Regular price $69.95
Sale price $69.95 Regular price
PREORDER
SHIPPING WEEK OF APRIL 29 ON THE 30ML FORMAT
Shipping calculated at checkout.

Pickup available at 9400, rue John-Simons

Usually ready in 1 hour

CQUARTZ - Gliss (Ceramic overcoating)

30ml
  • 9400, rue John-Simons

    Pickup available, usually ready in 1 hour

    9400 Rue John-Simons
    100
    Québec QC G2B 0S9
    Canada

    +14188474747


With GLISS, CARPRO has brought new advancements in bare nanotechnology and designed an all-new super smooth, super shiny and easy to apply ceramic nano-coating that excels as a topcoat for all CQUARTZ coatings!


Using long chain modified carbon fluorine polymers and enhanced nanotechnology, GLISS provides increased resistance to static build-up, dust retention, and many types of mineral and water stains!

Instructions for use: (to be used as a primer).

1. Wash with CARPRO RESET , decontaminate and polish with CARPRO REFLECT . If heavier cutting is needed, can start with CARPRO CLEARCUT OR ULTRACUT .      

2. Wipe with CARPRO ERASER (vehicle must be 100% dry and free of moisture or dew).      

3. Swipe two lines of product along the length of the suede applicator.      

4. Apply evenly to surface, approximately 2' x 2' at a time. Any overlap from section to section should be within a few minutes for even application.      

5. Add more product to the applicator as needed to maintain a wet, even application.      

6. Gliss will flash quickly and when a white mist forms, immediately wipe away any residue using a microfiber towel. If the mist remains too long, reapply and wipe off immediately.      

7. Wait 1 hour between coats. If you have an IR lamp, you can repeat immediately. Total hardening time: 6 hours.      

Directions: (to be used as a top coat).

1. Can be applied 4 hours or more after CQuartz. We recommend 24 hours      

2. If you have an Infrared lamp, it can be applied after 4 hours after applying CQuartz      

Advice:

  • Keep surface dry for at least one hour after application.      
  • Wipe off all traces of water on the surface for the first 24 hours after application.      
  • Avoid detergents and chemicals for 5-7 days after application.      
  • If it is dry and the air is clean outside, you can park the vehicle in direct sunlight after application is complete to speed up the cure.      
  • Maintain washing regularly with CARPRO Reset or CARPRO HYDROFOAM

Precautions:

  • Keep container tightly closed after use.      
  • Store in a cool, dry place.      
  • Keep it out of reach of children.      
  • Do not ingest.      

AVAILABLE IN: 30ML,50ML and 100ML