NOTE: During the transition period to the new CARPRO 2026 labels, the product is currently being delivered in the previous packaging. The formula remains exactly the same and unchanged.
Lift is a highly concentrated pre-wash foaming agent that dissolves and removes a large amount of dirt in a completely contactless manner, before the application of vehicle shampoo.
Lift uses 12pH alkyl-based cleaning ingredients that are both powerful and gentle, suitable for all foam guns. Applied at a typical dilution ratio of 1:10 (or other ratios depending on the desired foam viscosity), Lift will remain on surfaces for approximately 5 minutes. Lift rinses off very easily. It is not a highly foaming surface cleaner, but it has been designed as a true active surfactant.
As the product is applied to the surface, the Lift bubbles will burst and move, encouraging the soaking and cleaning agents to begin working. They lift dirt from the road by bonding with our proprietary blend of surfactants.
- With foam cannon: 1:10
- At IK Foam Pro: 1:12 to 1:14
- Effective pre-wash cleaner
- High pH surface active foaming agent
- Dilute Lift with water. We recommend a 1:10 ratio, but you can use leaner proportions for a thinner mix or richer proportions for a denser foam.
- Always leave the product on the surface for a few minutes before rinsing – the longer, the better. Do not allow the product to dry, even diluted.
- Rinse the car from the bottom up to allow the product to work for a longer period.
- Once rinsed, proceed with decontamination or washing with pH-neutral soap such as CARPRO Reset .
NOTE: During the transition period to the new CARPRO 2026 labels, the product is currently being delivered in the previous packaging. The formula remains exactly the same and unchanged.
Lift is a highly concentrated pre-wash foaming agent that dissolves and removes a large amount of dirt in a completely contactless manner, before the application of vehicle shampoo.
Lift uses 12pH alkyl-based cleaning ingredients that are both powerful and gentle, suitable for all foam guns. Applied at a typical dilution ratio of 1:10 (or other ratios depending on the desired foam viscosity), Lift will remain on surfaces for approximately 5 minutes. Lift rinses off very easily. It is not a highly foaming surface cleaner, but it has been designed as a true active surfactant.
As the product is applied to the surface, the Lift bubbles will burst and move, encouraging the soaking and cleaning agents to begin working. They lift dirt from the road by bonding with our proprietary blend of surfactants.
- With foam cannon: 1:10
- At IK Foam Pro: 1:12 to 1:14
- Effective pre-wash cleaner
- High pH surface active foaming agent
- Dilute Lift with water. We recommend a 1:10 ratio, but you can use leaner proportions for a thinner mix or richer proportions for a denser foam.
- Always leave the product on the surface for a few minutes before rinsing – the longer, the better. Do not allow the product to dry, even diluted.
- Rinse the car from the bottom up to allow the product to work for a longer period.
- Once rinsed, proceed with decontamination or washing with pH-neutral soap such as CARPRO Reset .
15%
30%
20%
Product title
Vendor
$19.99 | $24.99
Product title
Vendor
$19.99 | $24.99
Product title
Vendor
$19.99 | $24.99
Product title
Vendor
