CARPRO RinseX: the rinse-free wash that simplifies car care
Washing your vehicle without finishing with a hose rinse? That’s exactly what CARPRO RinseX offers. Introduced as a new product at SEMA 2026, this concentrated cleaner features a highly lubricated formula and can be diluted up to 1:400 to make regular vehicle maintenance easier.
The goal is simple: to offer a convenient solution when access to a conventional rinse is limited or when speed is important. Wash, dry, and get back on the road.
A rinse-free wash, not a waterless wash
The distinction is worth clarifying: RinseX is used diluted in water. The rinse-free wash method involves cleaning with a suitable solution, then drying the surface without performing a final hose rinse. Bucket washing is also one of the product’s intended uses.
This approach meets a practical need: regularly maintaining a vehicle without always relying on a complete wash setup. CARPRO positions RinseX for situations where a final rinse is not possible, or when you want to simplify the routine.
Road film meets its match
The RinseX formula is designed to break down road film and oily residues, then help lift dirt from the surface. CARPRO also highlights its respect for existing paint protection: the goal is to clean without compromising the existing treatment.
Its high lubrication is one of its core features. RinseX is therefore not simply intended to replace the final rinse: it offers a cleaning solution suited to this maintenance method.
Our advice: always adapt the method to the condition of the vehicle. On a bodywork covered in mud, sand, or significant debris, first remove it with an appropriate pre-wash rather than going straight to a contact wash. A lubricated formula does not eliminate the need for a careful method.
A dilution of up to 1:400: a small amount that goes a long way
One of RinseX’s main advantages is its concentration. The product is presented with a 1:400 dilution for rinse-free washing, allowing you to prepare a large amount of solution from a small volume of concentrate.
Calculating this ratio as one part product to 400 parts water, here are some benchmarks:
| Amount of water | Amount of RinseX at 1:400 |
|---|---|
| 4 liters | 10 ml |
| 8 liters | 20 ml |
| 10 liters | 25 ml |
The launch material also announces approximately 56% additional dilution yield compared to a product used at 1:256, for the same amount of concentrate. This is a comparison of the volume of solution obtained, and not a 56% saving on the cost of the wash.
To compare the actual cost of two products, you must therefore consider both their purchase price, their size, and their usage dilution.
No silicone or shine agents: cleaning takes priority
RinseX uses a formulation without silicone and without shine enhancers. CARPRO thus emphasizes rinse-free cleaning rather than adding a cosmetic effect during the wash.
This approach clearly separates the steps of your routine: clean first, then decide on the finish or protection to apply according to your needs. The product is notably presented for maintaining vehicle surfaces, including already protected paintwork.
An effective clean, with the freedom to choose what comes next.
One bottle, several uses
RinseX is not limited to maintenance washing. Its versatility allows it to be incorporated into several detailing operations, using the appropriate dilution for each task:
- Pre-treatment: to prepare the surface before washing.
- Rinse-free bucket wash:for regular vehicle maintenance.
- Lubricating a decontamination towel:for using a clay towel.
- Removing residues after polishing:to make them easier to clean.
The wash ratio should not be automatically applied to all these uses. Follow CARPRO’s instructions for the operation being performed. For a project that subsequently involves applying a coating, also follow the preparation protocol required by the coating manufacturer.
Simplify the wash without neglecting the method
At Centre de l’Auto Élégance, we recommend considering rinse-free washing as a method in its own right, and not as a shortcut that allows you to neglect usual precautions.
Prepare your solution precisely, use clean accessories, and work in sections. Have enough microfiber towels so you do not continue wiping with a side loaded with dirt, then carefully dry the cleaned surfaces.
The right goal is not just to go faster: it is to achieve a clean result with a method suited to the vehicle and working conditions.
Discover CARPRO RinseX at Centre de l’Auto Élégance
RinseX combines a highly lubricated formula, high concentration, and several uses in a single bottle. It is an option for those who want to incorporate rinse-free washing into their maintenance routine.
Find CARPRO RinseX in 500 ml, 1 liter, and 4 liter sizes on the Centre de l’Auto Élégance online store, and choose the size suited to your frequency of use.
Wash. Dry. Get back on the road. CARPRO RinseX.
