The CARPRO ALLiN is a water-based, all-in-one correction polish, specially designed to combine cutting, finishing, and hydrophobic protection in a single step, greatly simplifying automotive correction and reconditioning work.
Its versatile formula removes paint defects, swirls, and sanding haze up to 2500 grit, while producing a surface with excellent optical clarity and high shine.
Unlike conventional polishes that require an additional protection step, ALLiN simultaneously deposits a hydrophobic base layer during the polishing process, allowing the paint to be corrected, refined, and protected in a single operation.
This 3-in-1 approach reduces the number of steps required, optimizes working time, and improves productivity, particularly during quick correction work, vehicle reconditioning, or mobile detailing.
Its level of correction can be adjusted depending on the pad used. CARPRO recommends the CARPRO Ultra Pad for harder paints or major defects, as well as the CARPRO Orange Pad for softer paints or finishing work.
The formula is designed to be worked until the residues become completely transparent, making it easy to control the polishing cycle and achieve an even finish.
Once applied, the hydrophobic protection reaches its full effect after 24 hours of curing. To prolong or enhance this protection, ALLiN can also be maintained with compatible products such as CARPRO Reload, Elixir, or HydrO2.
Designed exclusively for use with a Double Action (DA) orbital polisher, CARPRO ALLiN is a versatile solution for detailing professionals and enthusiasts looking for effective one-step results.
Result
Paint that is corrected, refined, shiny, and hydrophobic in a single step, with a simplified polishing process that saves time without multiplying products and operations.
CARPRO ALLiN – Cut. Polish. Protect. One step to do it all.
- Prepare the vehicle: wash the bodywork thoroughly to remove dirt, road residue, and contaminants present on the paint.
- Decontaminate the surface: perform chemical or mechanical decontamination if necessary to obtain a clean surface ready for polishing.
- Inspect the paint: identify the defects to be corrected and select the appropriate pad depending on the hardness of the paint and the desired level of correction.
- Choose the pad: use a CARPRO Ultra Pad for harder paints or major defects, or a CARPRO Orange Pad for softer paints and finishing work.
- Prepare the pad: condition the polishing pad and apply 3 to 4 pea-sized drops of product.
- Define the work area: work on a section of approximately 40 × 40 cm (16 × 16 in) to maintain good control of the process.
- Set the polisher: use a Double Action polisher at a speed of 3.5 to 4, according to CARPRO's recommendations.
- Perform the polishing: guide the machine by making cross-over passes (cross-hatch) without applying additional pressure.
- Complete the cycle: continue polishing until the product residues become completely transparent.
- Wipe off the residues: gently remove the residues with a clean, soft, long-fiber microfiber.
- Clean the pad: remove the accumulated residues between sections to maintain good correction efficiency.
- Allow the protection to cure: if ALLiN is used as a final protection, allow the hydrophobic layer to stabilize for 24 hours to reach its full beading effect.
Important: CARPRO ALLiN is designed exclusively for Double Action (DA) polishers. Do not use with a rotary polisher.
Additional protection: To maintain or enhance the hydrophobic effect, CARPRO recommends Reload, Elixir, or HydrO2.
Applying a ceramic coating: If a coating is to be applied after ALLiN, perform a preliminary preparation wipe with CARPRO Eraser to remove oils and residues present on the surface and properly prepare the paint.
Maintenance and Preservation
To preserve the correction performance and finishing quality of CARPRO ALLiN, use clean pads and keep the polishing accessories in good condition.
- Clean the pad between sections to maintain its cutting efficiency.
- Avoid saturating the pad with an excessive amount of product.
- Use clean, soft microfibers to remove residues.
- Regularly check the condition of the pads and replace those that are damaged.
- Respect the 24 hours of curing required for the full development of the hydrophobic effect.
- Maintain the surface with washing products compatible with hydrophobic protections.
- Use CARPRO Reload, Elixir, or HydrO2 to maintain or enhance the protection as needed.
- Carefully close the container after use.
- Store the product in its original packaging.
- Avoid extreme temperatures and follow the storage conditions indicated by CARPRO.
- Product 3-in-1: cut, polish, and protect
- Formulation based on water
- Correction and finishing in a single step
- Correction capability up to sanding marks grain 2500
- Removes swirls and paint defects
- Corrects compatible sanding haze
- Offers excellent optical clarity
- Produces a shiny, refined finish
- Deposits a hydrophobic base layer
- Full hydrophobic effect after 24 hours of curing
- Combines correction and protection in a single operation
- Reduces the number of steps required for reconditioning
- Helps optimize working time
- Ideal for quick corrections and one-step
- Suitable for mobile detailing work
- Compatible with various correction and finishing pads
- CARPRO Ultra Pad recommended for hard paints or major defects
- CARPRO Orange Pad recommended for soft paints or finishing work
- Polishing cycle until residues become completely transparent
- Recommended application on sections of 40 × 40 cm
- Recommended polisher speed of 3.5 to 4
- Work in cross-over passes without additional pressure
- Protection that can be maintained with CARPRO Reload, Elixir, or HydrO2
- Suitable for professionals and enthusiasts
- Exclusively for use with a Double Action (DA) polisher
- Type: All-in-one correction polish
- Technology: Water-based formula
- Functions: Cut, polish, and protect
- Number of steps: 1
- Advertised correction capability: Up to 2500 grit
- Targeted defects: Swirls, paint defects, and sanding haze
- Finish: High clarity and shine
- Integrated protection: Hydrophobic base layer
- Hydrophobic curing: 24 hours
- Compatible machine: Double Action (DA) orbital polisher
- Rotary polisher: Not compatible
- Recommended speed: 3.5 to 4
- Recommended working area: 40 × 40 cm / 16 × 16 in
- Recommended initial quantity: 3 to 4 pea-sized drops
- Recommended movement: Cross-over passes (cross-hatch)
- Recommended pressure: No additional pressure
- End of cycle: Residues become completely transparent
- Wiping: Clean, soft, long-fiber microfiber
- Pad for intensive correction: CARPRO Ultra Pad
- Pad for light correction and finishing: CARPRO Orange Pad
- Compatible maintenance products: CARPRO Reload, Elixir, and HydrO2
- Preparation before coating: Wipe with CARPRO Eraser
- Application: Mechanical polishing
Recommended Applications
- One-step correction
- Swirl removal
- Paint defect correction
- Removal of sanding haze up to 2500 grit
- Finishing polish
- Clarity and shine enhancement
- Vehicle aesthetic reconditioning
- Pre-sale vehicle preparation
- Quick correction with integrated protection
- Mobile detailing work
- Professional aesthetic maintenance
- Tasks requiring excellent one-step performance
- Correction of hard paints with the appropriate pad
- Polishing of soft paints with a finishing pad
- Surface preparation before an additional compatible protection
1. What is the difference between CARPRO ALLiN and a traditional polish?
The CARPRO ALLiN combines three functions in a single product: correction, polishing, and hydrophobic protection. Unlike a conventional polish that generally requires an additional protection step, ALLiN corrects defects, enhances shine, and deposits a hydrophobic base layer in a single operation. The protection reaches its full hydrophobic effect after 24 hours of curing.
2. What types of defects can be corrected with CARPRO ALLiN, and which pad should be used?
CARPRO ALLiN is designed to remove swirls, paint defects, and sanding haze up to 2500 grit, depending on working conditions. For harder paints or major defects, CARPRO recommends the Ultra Pad. For softer paints or finishing work, the manufacturer recommends the Orange Pad. The result also depends on the hardness of the paint and the technique used.
3. What application method does CARPRO recommend?
CARPRO recommends using a Double Action polisher at a speed of 3.5 to 4, with 3 to 4 drops of product on a previously conditioned pad. The work should be performed on sections of approximately 40 × 40 cm, making cross-over passes without additional pressure. The polishing cycle is complete when the residues become completely transparent. Then simply remove them with a clean, soft microfiber.
4. Should a wax or sealant be applied after using CARPRO ALLiN?
Not necessarily. The CARPRO ALLiN already deposits a hydrophobic base layer during polishing, allowing for a corrected and protected finish in a single step. The full beading effect develops after 24 hours. To maintain or enhance the protection, CARPRO recommends Reload, Elixir, or HydrO2. If a ceramic coating is to be applied, a preliminary wipe with CARPRO Eraser is necessary to properly prepare the surface.
5. Is CARPRO ALLiN suitable for professionals who want to perform quick corrections?
Yes. The CARPRO ALLiN is particularly suitable for one-stepcorrection work, vehicle reconditioning, and mobile detailing. By combining correction, finishing, and hydrophobic protection in a single operation, it reduces the number of steps required and improves productivity when the vehicle does not require a full multi-step correction. However, its use is reserved for Double Action (DA) polishers.
The CARPRO ALLiN is a water-based, all-in-one correction polish, specially designed to combine cutting, finishing, and hydrophobic protection in a single step, greatly simplifying automotive correction and reconditioning work.
Its versatile formula removes paint defects, swirls, and sanding haze up to 2500 grit, while producing a surface with excellent optical clarity and high shine.
Unlike conventional polishes that require an additional protection step, ALLiN simultaneously deposits a hydrophobic base layer during the polishing process, allowing the paint to be corrected, refined, and protected in a single operation.
This 3-in-1 approach reduces the number of steps required, optimizes working time, and improves productivity, particularly during quick correction work, vehicle reconditioning, or mobile detailing.
Its level of correction can be adjusted depending on the pad used. CARPRO recommends the CARPRO Ultra Pad for harder paints or major defects, as well as the CARPRO Orange Pad for softer paints or finishing work.
The formula is designed to be worked until the residues become completely transparent, making it easy to control the polishing cycle and achieve an even finish.
Once applied, the hydrophobic protection reaches its full effect after 24 hours of curing. To prolong or enhance this protection, ALLiN can also be maintained with compatible products such as CARPRO Reload, Elixir, or HydrO2.
Designed exclusively for use with a Double Action (DA) orbital polisher, CARPRO ALLiN is a versatile solution for detailing professionals and enthusiasts looking for effective one-step results.
Result
Paint that is corrected, refined, shiny, and hydrophobic in a single step, with a simplified polishing process that saves time without multiplying products and operations.
CARPRO ALLiN – Cut. Polish. Protect. One step to do it all.
- Prepare the vehicle: wash the bodywork thoroughly to remove dirt, road residue, and contaminants present on the paint.
- Decontaminate the surface: perform chemical or mechanical decontamination if necessary to obtain a clean surface ready for polishing.
- Inspect the paint: identify the defects to be corrected and select the appropriate pad depending on the hardness of the paint and the desired level of correction.
- Choose the pad: use a CARPRO Ultra Pad for harder paints or major defects, or a CARPRO Orange Pad for softer paints and finishing work.
- Prepare the pad: condition the polishing pad and apply 3 to 4 pea-sized drops of product.
- Define the work area: work on a section of approximately 40 × 40 cm (16 × 16 in) to maintain good control of the process.
- Set the polisher: use a Double Action polisher at a speed of 3.5 to 4, according to CARPRO's recommendations.
- Perform the polishing: guide the machine by making cross-over passes (cross-hatch) without applying additional pressure.
- Complete the cycle: continue polishing until the product residues become completely transparent.
- Wipe off the residues: gently remove the residues with a clean, soft, long-fiber microfiber.
- Clean the pad: remove the accumulated residues between sections to maintain good correction efficiency.
- Allow the protection to cure: if ALLiN is used as a final protection, allow the hydrophobic layer to stabilize for 24 hours to reach its full beading effect.
Important: CARPRO ALLiN is designed exclusively for Double Action (DA) polishers. Do not use with a rotary polisher.
Additional protection: To maintain or enhance the hydrophobic effect, CARPRO recommends Reload, Elixir, or HydrO2.
Applying a ceramic coating: If a coating is to be applied after ALLiN, perform a preliminary preparation wipe with CARPRO Eraser to remove oils and residues present on the surface and properly prepare the paint.
Maintenance and Preservation
To preserve the correction performance and finishing quality of CARPRO ALLiN, use clean pads and keep the polishing accessories in good condition.
- Clean the pad between sections to maintain its cutting efficiency.
- Avoid saturating the pad with an excessive amount of product.
- Use clean, soft microfibers to remove residues.
- Regularly check the condition of the pads and replace those that are damaged.
- Respect the 24 hours of curing required for the full development of the hydrophobic effect.
- Maintain the surface with washing products compatible with hydrophobic protections.
- Use CARPRO Reload, Elixir, or HydrO2 to maintain or enhance the protection as needed.
- Carefully close the container after use.
- Store the product in its original packaging.
- Avoid extreme temperatures and follow the storage conditions indicated by CARPRO.
- Product 3-in-1: cut, polish, and protect
- Formulation based on water
- Correction and finishing in a single step
- Correction capability up to sanding marks grain 2500
- Removes swirls and paint defects
- Corrects compatible sanding haze
- Offers excellent optical clarity
- Produces a shiny, refined finish
- Deposits a hydrophobic base layer
- Full hydrophobic effect after 24 hours of curing
- Combines correction and protection in a single operation
- Reduces the number of steps required for reconditioning
- Helps optimize working time
- Ideal for quick corrections and one-step
- Suitable for mobile detailing work
- Compatible with various correction and finishing pads
- CARPRO Ultra Pad recommended for hard paints or major defects
- CARPRO Orange Pad recommended for soft paints or finishing work
- Polishing cycle until residues become completely transparent
- Recommended application on sections of 40 × 40 cm
- Recommended polisher speed of 3.5 to 4
- Work in cross-over passes without additional pressure
- Protection that can be maintained with CARPRO Reload, Elixir, or HydrO2
- Suitable for professionals and enthusiasts
- Exclusively for use with a Double Action (DA) polisher
- Type: All-in-one correction polish
- Technology: Water-based formula
- Functions: Cut, polish, and protect
- Number of steps: 1
- Advertised correction capability: Up to 2500 grit
- Targeted defects: Swirls, paint defects, and sanding haze
- Finish: High clarity and shine
- Integrated protection: Hydrophobic base layer
- Hydrophobic curing: 24 hours
- Compatible machine: Double Action (DA) orbital polisher
- Rotary polisher: Not compatible
- Recommended speed: 3.5 to 4
- Recommended working area: 40 × 40 cm / 16 × 16 in
- Recommended initial quantity: 3 to 4 pea-sized drops
- Recommended movement: Cross-over passes (cross-hatch)
- Recommended pressure: No additional pressure
- End of cycle: Residues become completely transparent
- Wiping: Clean, soft, long-fiber microfiber
- Pad for intensive correction: CARPRO Ultra Pad
- Pad for light correction and finishing: CARPRO Orange Pad
- Compatible maintenance products: CARPRO Reload, Elixir, and HydrO2
- Preparation before coating: Wipe with CARPRO Eraser
- Application: Mechanical polishing
Recommended Applications
- One-step correction
- Swirl removal
- Paint defect correction
- Removal of sanding haze up to 2500 grit
- Finishing polish
- Clarity and shine enhancement
- Vehicle aesthetic reconditioning
- Pre-sale vehicle preparation
- Quick correction with integrated protection
- Mobile detailing work
- Professional aesthetic maintenance
- Tasks requiring excellent one-step performance
- Correction of hard paints with the appropriate pad
- Polishing of soft paints with a finishing pad
- Surface preparation before an additional compatible protection
1. What is the difference between CARPRO ALLiN and a traditional polish?
The CARPRO ALLiN combines three functions in a single product: correction, polishing, and hydrophobic protection. Unlike a conventional polish that generally requires an additional protection step, ALLiN corrects defects, enhances shine, and deposits a hydrophobic base layer in a single operation. The protection reaches its full hydrophobic effect after 24 hours of curing.
2. What types of defects can be corrected with CARPRO ALLiN, and which pad should be used?
CARPRO ALLiN is designed to remove swirls, paint defects, and sanding haze up to 2500 grit, depending on working conditions. For harder paints or major defects, CARPRO recommends the Ultra Pad. For softer paints or finishing work, the manufacturer recommends the Orange Pad. The result also depends on the hardness of the paint and the technique used.
3. What application method does CARPRO recommend?
CARPRO recommends using a Double Action polisher at a speed of 3.5 to 4, with 3 to 4 drops of product on a previously conditioned pad. The work should be performed on sections of approximately 40 × 40 cm, making cross-over passes without additional pressure. The polishing cycle is complete when the residues become completely transparent. Then simply remove them with a clean, soft microfiber.
4. Should a wax or sealant be applied after using CARPRO ALLiN?
Not necessarily. The CARPRO ALLiN already deposits a hydrophobic base layer during polishing, allowing for a corrected and protected finish in a single step. The full beading effect develops after 24 hours. To maintain or enhance the protection, CARPRO recommends Reload, Elixir, or HydrO2. If a ceramic coating is to be applied, a preliminary wipe with CARPRO Eraser is necessary to properly prepare the surface.
5. Is CARPRO ALLiN suitable for professionals who want to perform quick corrections?
Yes. The CARPRO ALLiN is particularly suitable for one-stepcorrection work, vehicle reconditioning, and mobile detailing. By combining correction, finishing, and hydrophobic protection in a single operation, it reduces the number of steps required and improves productivity when the vehicle does not require a full multi-step correction. However, its use is reserved for Double Action (DA) polishers.
Product title
Vendor
$19.99 | $24.99
Product title
Vendor
$19.99 | $24.99
Product title
Vendor
$19.99 | $24.99
Product title
Vendor
