CARPRO Essence Plus

• Can be used as protection
• Repairs CQuartz
• Adds a protective layer of SiO2
• Excellent hydrophobic agent.
• Produces an intense shine.
• Can be applied by hand or machine
• Cleans, shines, and protects all glossy surfaces

• Wash with Reset, decontaminate surfaces with IronX, Spotless, and, if necessary, Tar X.
• Wash and rinse thoroughly.
• Dry the vehicle and prepare the surface with CARPRO Eraser, to obtain a surface free of oils and residues.

Using with a dual action polisher:

• Prime the CARPRO Gloss pad with Essence PLUS.
• Apply, without pressure, making several passes at low speed (1-3) on an area of approximately 24" x 24" (60cm x 60cm).
• Clean the pad with a brush between each section, then reapply a few drops of Essence PLUS.
• Work on a new section and repeat steps 2-3.
• Continue over the entire vehicle.
• Remove residues with a soft microfiber cloth.

Precautions:

• On a ceramic-coated surface: If using a machine, use only with the CARPRO Gloss Pad (NO OTHER PAD)** The goal is to repair Cquartz; if you use an abrasive pad, you will weaken the ceramic coating, and thereby the vehicle's protection. We strongly suggest using the CarPro Gloss Pad.
• On a ceramic-coated surface: Keep the pad flat to avoid applying pressure to the surface.
• Keep your bottle tightly closed after use.
• Store your bottle away from direct sunlight.
• Always test a new product on a less visible area before applying it to an entire vehicle.
• Do not use as a ceramic coating primer!