CARPRO UltraCut is one of the most versatile cutting compounds you will ever use, suitable for removing all defects.
You can modify its cutting ability by varying your pad choice and hand motion.
UltraCut features a cocktail of fully diminishing abrasives, which correct heavy defects, while producing minimal haze. Combine it with a cutting or microfiber pad for extremely effective and efficient defect removal. Switch to a CARPRO orange polishing pad and you can finish haze-free, even on the most sensitive paints.
UltraCut is a perfect solution for rotary or DA polishing with very low dusting and a lubricant that allows the abrasives to be fully utilized over extended periods. This enables full breakdown with less marring and holograms.
- Extreme Cutting Action
- Extremely Low Dusting
- Suitable for all paint finishes
- Suitable for both Dual Action & Rotary
Orbital Machine:
- Prime a clean dry pad with a very fine layer of compound and add 3-4 extra pea-sized drops of UltraCut.
- Spread the product over a section.
- Increase speed to HIGH (4-5).
- Use MIN pressure for the first 2-3 passes and increase with each pass.
- Blow air onto the pads often.
- When scratches disappear or the clear coat becomes clear, wipe with an MF towel.
- Clean the pad.
- Move to the next section, apply 2-4 pea-sized drops to the pad and repeat steps 2-7.
Rotary Machine:
- Prime a clean dry pad with a very fine layer of compound and add 3-4 extra pea-sized drops of UltraCut.
- Spread the product over a section.
- Keep the polisher at LOW speed (1000-1200 RPM).
- Use MIN pressure for the first 2-3 passes and increase with each pass up to MAX.
- Finish with LOW pressure.
- When scratches disappear or the clear coat becomes clear, wipe with an MF towel.
- Clean the pad.
- Move to the next section, apply 2-4 pea-sized drops to the pad and repeat steps 2-7.
CARPRO UltraCut is one of the most versatile cutting compounds you will ever use, suitable for removing all defects.
You can modify its cutting ability by varying your pad choice and hand motion.
UltraCut features a cocktail of fully diminishing abrasives, which correct heavy defects, while producing minimal haze. Combine it with a cutting or microfiber pad for extremely effective and efficient defect removal. Switch to a CARPRO orange polishing pad and you can finish haze-free, even on the most sensitive paints.
UltraCut is a perfect solution for rotary or DA polishing with very low dusting and a lubricant that allows the abrasives to be fully utilized over extended periods. This enables full breakdown with less marring and holograms.
- Extreme Cutting Action
- Extremely Low Dusting
- Suitable for all paint finishes
- Suitable for both Dual Action & Rotary
Orbital Machine:
- Prime a clean dry pad with a very fine layer of compound and add 3-4 extra pea-sized drops of UltraCut.
- Spread the product over a section.
- Increase speed to HIGH (4-5).
- Use MIN pressure for the first 2-3 passes and increase with each pass.
- Blow air onto the pads often.
- When scratches disappear or the clear coat becomes clear, wipe with an MF towel.
- Clean the pad.
- Move to the next section, apply 2-4 pea-sized drops to the pad and repeat steps 2-7.
Rotary Machine:
- Prime a clean dry pad with a very fine layer of compound and add 3-4 extra pea-sized drops of UltraCut.
- Spread the product over a section.
- Keep the polisher at LOW speed (1000-1200 RPM).
- Use MIN pressure for the first 2-3 passes and increase with each pass up to MAX.
- Finish with LOW pressure.
- When scratches disappear or the clear coat becomes clear, wipe with an MF towel.
- Clean the pad.
- Move to the next section, apply 2-4 pea-sized drops to the pad and repeat steps 2-7.
Product title
Vendor
$19.99 | $24.99
Product title
Vendor
$19.99 | $24.99
Product title
Vendor
$19.99 | $24.99
Product title
Vendor
