MTM Hydro Magnum28 Foam Cannon Kit with Stand Up Bottle

The MTM Hydro Italian Magnum28 Foam Cannon Kit includes the industries newest foam cannon paired with the industries newest spray gun.

The sleek and rugged SGS28 spray gun with integrated stainless steel swivel is now paired with Stainless Steel fittings and the PF22 foam cannon to provide you with a premium Italian foaming kit unsurpassed by any other.

Complete with the new PF22, this kit is second to none. Whether you're foaming your car on the weekend or you're a professional detailer washing multiple vehicles per day, this tool will save you time and money.

Simply attach the foam cannon to your pressure washer using one of the included fittings, fill with your desired chemical ratio, and you're up and running. The snub nose Magnum28 kit allows you to get into tight spaces when cleaning and avoids reaching 40" away to adjust your cannon settings.



NOTE

To install on some models of pressure washers such as Greenworks, AR, Ryobi, or Sunjoe two additional fittings are needed. See 24.0481 and 24.0448 to fit those models.

* Note * This product is only for use with the MTM Hydro Foam Cannon. Improper use or installation of a QC nozzle to the spray gun outlet is forbidden as it can lead to serious injury. For proper use, once you are finished foaming, install an extension wand to the gun inlet for rinsing.

Magnum28 Foam Cannon Kit Contents:

• Italian Brass Foam Cannon Body
• Italian 32oz Calibrated PF22 Stand Up Bottle
• 1/4" x 9" Tube for drawing chemicals
• 3.5 Orifice (1.25 mm) installed in the foamer body
• 3.0 Orifice (1.1 mm) included with kit
• SGS 28 Spray Gun with integrated Stainless Steel Swivel
• 1/4" Male Stainless Steel Coupler - Gun Outlet
• 1/4" Stainless Steel QC Plug - Cannon Inlet
• 3/8" Stainless Steel QC Plug - Gun Inlet -
• 3/8" M22 (14mm) Plug - Optional Gun Inlet Fitting
• Teflon Tape for install - 6 wraps per fitting
• Manual with care instructions and exploded view

Specifications:

• Min. 1,100 psi - Max. 4,000 psi
• Min. 1.4 gpm - Max. 5.3 gpm
• Max. 140° F

The full spectrum of ratings is not supported by the 3.5 or 3.0 orifices included with this kit. Other orifices may be needed for higher flow machines that have a lower PSI - Example: 2000 PSI with 3.5 GPM requires a 5.0 orifice. For larger orifices, you will know it is not working as you will experience the foam cannon starting and stopping as your unloader skips in and out of bypass. You will also get watery foam as the 3.5 orifice size is significantly smaller than the 5.0 needed for your machine.

MTM Foam Cannons will not work with Flow Sensing Unloaders as you will get the same results as outlined for an undersized orifice.

See below for additional orifice sizes and replacement items available for purchase.

Keywords: Foam gun foamgun foam cannon