TheAtlas AT-01 is a heavy-duty chamois wringer designed to make it easier to remove excess water from chamois used during the manual washing and drying of vehicles.
Suitable for residential, commercial, and industrial use, it provides efficient mechanical wringing while reducing the effort required compared to fully manual wringing.
Its system is equipped with two adjustable-tension springs, allowing the pressure applied by the rollers to be adjusted according to wringing requirements.
The AT-01 also features a crank with a wooden handle, which can be installed on either side of the wringer to adapt its use to the layout of your workspace.
A wall mount is included, allowing for a quick, secure, and permanent installation. This setup helps free up space and create a convenient wringing station in a garage, car wash, or auto detailing center.
Weighing 6.76 kg and featuring a mechanical design suitable for repeated use, the AT-01 is a practical solution for car wash professionals and enthusiasts looking for equipment dedicated to wringing chamois.
Result
A faster, more consistent, and more convenient way to wring out car chamois, thanks to an adjustable-tension mechanical system and a wall mount designed for washing environments.
Atlas AT-01 – Two adjustable springs, a reversible crank, and an included wall mount to simplify professional wringing.
- Install the wringer: securely attach the wall mount to a suitable structure.
- Position the crank: install the handle on the most convenient side depending on the layout of your workspace.
- Adjust the tension: adjust the two springs to achieve pressure suitable for the chamois being used.
- Insert the chamois: place the chamois between the rollers.
- Wring out the chamois: gradually turn the crank to pass the chamois through the rollers and extract excess water.
- Repeat as needed: adjust the tension and pass it through again if necessary.
Care and Storage
After use, remove any residue and allow the equipment to dry to limit moisture buildup.
- Clean the rollers regularly.
- Check that the crank is operating correctly.
- Periodically inspect the springs and their settings.
- Check the security of the wall mountings.
- Avoid passing rigid or abrasive objects between the rollers.
- Mechanical wringer for car drying chamois
- Two adjustable-tension springs to adjust wringing pressure
- Roller system for extracting excess water
- Crank with wooden handle
- Handle can be installed on the left or right
- Wall mount included
- Permanent installation for convenient and stable use
- Reduces the effort associated with manual wringing
- Facilitates the reuse of chamois during drying
- Designed for residential, commercial, and industrial use
- Suitable for auto detailing centers and car washes
- Type: Mechanical chamois wringer
- Dimensions: 35.56 x 25.4 x 19.05 cm
- Weight: 6.76 kg
- Wringing system: Mechanical pressure rollers
- Adjustment: 2 adjustable-tension springs
- Operation: Manual crank
- Handle: Wood
- Handle position: Can be installed on either side
- Installation: Wall-mounted
- Wall mount: Included
Recommended Applications
- Wringing out car chamois
- Manual vehicle washing
- Car wash stations
- Auto detailing centers
- Residential garages
- Professional workshops
- Commercial and industrial facilities
1. What is the Atlas AT-01 wringer used for?
The Atlas AT-01 allows you to mechanically remove excess water from car chamois after use. Its roller system makes wringing easier and reduces the effort required compared to fully manual wringing.
2. Can the pressure applied to the chamois be adjusted?
Yes. The Atlas AT-01 is equipped with two adjustable-tension springs, allowing the pressure applied by the rollers to be adjusted according to wringing requirements and the type of chamois being used.
3. Can the crank be installed on the left or right?
Yes. The crank with wooden handle can be installed on either side of the wringer. This setup allows the equipment to be adapted to your workspace layout and usage preferences.
4. Is the wall mount included with the wringer?
Yes. The Atlas AT-01 comes with an included wall mount, allowing you to create a permanent and convenient wringing station in a garage, car wash, or auto detailing center. The installation must be carried out on a structure strong enough to support the equipment and the forces applied during use.
5. Is the Atlas AT-01 suitable for professional use?
Yes. The Atlas AT-01 is designed for residential, commercial, and industrial use. Its mechanical roller system, adjustable springs, and manual crank make it a practical piece of equipment for car wash professionals who regularly use drying chamois.
TheAtlas AT-01 is a heavy-duty chamois wringer designed to make it easier to remove excess water from chamois used during the manual washing and drying of vehicles.
Suitable for residential, commercial, and industrial use, it provides efficient mechanical wringing while reducing the effort required compared to fully manual wringing.
Its system is equipped with two adjustable-tension springs, allowing the pressure applied by the rollers to be adjusted according to wringing requirements.
The AT-01 also features a crank with a wooden handle, which can be installed on either side of the wringer to adapt its use to the layout of your workspace.
A wall mount is included, allowing for a quick, secure, and permanent installation. This setup helps free up space and create a convenient wringing station in a garage, car wash, or auto detailing center.
Weighing 6.76 kg and featuring a mechanical design suitable for repeated use, the AT-01 is a practical solution for car wash professionals and enthusiasts looking for equipment dedicated to wringing chamois.
Result
A faster, more consistent, and more convenient way to wring out car chamois, thanks to an adjustable-tension mechanical system and a wall mount designed for washing environments.
Atlas AT-01 – Two adjustable springs, a reversible crank, and an included wall mount to simplify professional wringing.
- Install the wringer: securely attach the wall mount to a suitable structure.
- Position the crank: install the handle on the most convenient side depending on the layout of your workspace.
- Adjust the tension: adjust the two springs to achieve pressure suitable for the chamois being used.
- Insert the chamois: place the chamois between the rollers.
- Wring out the chamois: gradually turn the crank to pass the chamois through the rollers and extract excess water.
- Repeat as needed: adjust the tension and pass it through again if necessary.
Care and Storage
After use, remove any residue and allow the equipment to dry to limit moisture buildup.
- Clean the rollers regularly.
- Check that the crank is operating correctly.
- Periodically inspect the springs and their settings.
- Check the security of the wall mountings.
- Avoid passing rigid or abrasive objects between the rollers.
- Mechanical wringer for car drying chamois
- Two adjustable-tension springs to adjust wringing pressure
- Roller system for extracting excess water
- Crank with wooden handle
- Handle can be installed on the left or right
- Wall mount included
- Permanent installation for convenient and stable use
- Reduces the effort associated with manual wringing
- Facilitates the reuse of chamois during drying
- Designed for residential, commercial, and industrial use
- Suitable for auto detailing centers and car washes
- Type: Mechanical chamois wringer
- Dimensions: 35.56 x 25.4 x 19.05 cm
- Weight: 6.76 kg
- Wringing system: Mechanical pressure rollers
- Adjustment: 2 adjustable-tension springs
- Operation: Manual crank
- Handle: Wood
- Handle position: Can be installed on either side
- Installation: Wall-mounted
- Wall mount: Included
Recommended Applications
- Wringing out car chamois
- Manual vehicle washing
- Car wash stations
- Auto detailing centers
- Residential garages
- Professional workshops
- Commercial and industrial facilities
1. What is the Atlas AT-01 wringer used for?
The Atlas AT-01 allows you to mechanically remove excess water from car chamois after use. Its roller system makes wringing easier and reduces the effort required compared to fully manual wringing.
2. Can the pressure applied to the chamois be adjusted?
Yes. The Atlas AT-01 is equipped with two adjustable-tension springs, allowing the pressure applied by the rollers to be adjusted according to wringing requirements and the type of chamois being used.
3. Can the crank be installed on the left or right?
Yes. The crank with wooden handle can be installed on either side of the wringer. This setup allows the equipment to be adapted to your workspace layout and usage preferences.
4. Is the wall mount included with the wringer?
Yes. The Atlas AT-01 comes with an included wall mount, allowing you to create a permanent and convenient wringing station in a garage, car wash, or auto detailing center. The installation must be carried out on a structure strong enough to support the equipment and the forces applied during use.
5. Is the Atlas AT-01 suitable for professional use?
Yes. The Atlas AT-01 is designed for residential, commercial, and industrial use. Its mechanical roller system, adjustable springs, and manual crank make it a practical piece of equipment for car wash professionals who regularly use drying chamois.
Product title
Vendor
$19.99 | $24.99
Product title
Vendor
$19.99 | $24.99
Product title
Vendor
$19.99 | $24.99
Product title
Vendor