The Active S350 Automotive Dryer is a high-performance touchless automotive dryer designed to quickly remove water from vehicle surfaces with a powerful airflow of up to 350 MPH (563 km/h), while reducing the need to use drying towels.
Equipped with a 1600 W motor running at 18,000 RPM, it generates a maximum airflow of 300 m³/h (180 CFM), effectively blowing water off paintwork, wheels, grilles, mirrors, emblems, and exterior trim.
Unlike traditional drying with a microfiber towel, the S350 allows you to dry surfaces without direct contact, reducing the risk of swirl marks caused by dirt particles that could become trapped in a towel.
Its washable and replaceable air filter system helps limit the projection of dust and contaminants during drying. The air slightly warmed by the motor also helps evaporate moisture.
The S350 includes a flexible hose that extends from 7.5 to 20 ft, equipped with a Twist-Lock connection system. It also comes with three interchangeable nozzles, allowing you to adjust the concentration and direction of the airflow for different vehicle surfaces.
Each nozzle features a soft protective trim, designed to reduce the risk of damage in the event of accidental contact with the bodywork.
Its compact design allows for mobile use on casters or wall mounting, depending on your workspace configuration. The two main wheels and two swivel casters make it easy to move around the vehicle, while the wall mount allows you to create a fixed drying station in a garage or workshop.
Operating on a 120 V / 60 Hz power supply, the Active S350 combines power, versatility, and ergonomics to provide a drying solution suitable for both detailing professionals and automotive care enthusiasts.
Result
A fast, precise, and touchless drying process that effectively removes water from large surfaces and hard-to-reach areas while reducing the risk of swirl marks associated with manual drying.
Active S350 Automotive Dryer – Air speeds of up to 350 MPH, 1600 W of power, and a 20 ft reach for professional touchless automotive drying.
- Prepare the vehicle: wash and rinse the vehicle thoroughly to remove soap residue and contaminants before drying.
- Position the dryer: place the S350 on a stable surface or install it on its compatible wall mount.
- Install the hose: connect the flexible hose to the dryer using the Twist-Lock connection mechanism.
- Choose the nozzle: select one of the three included nozzles depending on the surface to be dried and the desired airflow.
- Plug in the unit: connect the 18 ft power cord to an appropriate 120 V / 60 Hz electrical outlet.
- Turn on the dryer: use the push-button switch to start the motor.
- Dry the surfaces: direct the airflow over the bodywork using controlled movements to gradually blow away the water.
- Treat hard-to-reach areas: use an appropriate nozzle to remove water accumulated in mirrors, grilles, emblems, seals, and trim.
- Finish drying: check areas that may retain water and make additional passes as needed.
- Store the equipment: turn off the dryer, unplug the power supply, and allow the unit to cool before storing.
Important: Never direct the airflow toward eyes, people, or animals. Avoid using the unit in standing water or under direct exposure to water. Keep the air intakes clear and regularly check the condition of the filter. Observe the electrical requirements of the unit, especially its 120 V power supply and 13 A rated current.
Maintenance and Storage
Regularly clean the dryer and its filtration system to maintain optimal airflow and extend the life of the equipment.
- Periodically remove and clean the washable foam filter.
- Allow the filter to dry completely before reinstalling it.
- Replace the filter when it becomes damaged or excessively worn.
- Check that the air inlets and outlets remain clear.
- Clean the nozzles and inspect their soft protective trims.
- Check the condition of the flexible hose and its Twist-Lock mechanism.
- Regularly inspect the power cord.
- Clean the wheels and casters to maintain good mobility.
- Allow the unit to cool before storing it.
- Store the dryer in a clean, dry environment protected from freezing.
- Professional touchless
- Maximum air speed of 350 MPH / 563 km/h
- Powerful 1600 W
- Motor speed of 18,000 RPM
- Maximum airflow of 300 m³/h / 180 CFM
- Dries bodywork without direct contact
- Reduces the risk of swirl marks caused by using contaminated towels
- Ideal for removing water from hard-to-reach areas
- Filtered air for clean drying
- Washable and replaceable foam filter
- Flexible hose extends up to 20 ft
- Hose length when retracted: 7.5 ft
- Hose connection with Twist-Lock
- 3 interchangeable nozzles included
- 16 mm precision nozzle
- Venturi nozzle
- Flat Duckbill nozzle
- Quick nozzle-to-hose connection
- Soft protective trims on the nozzles
- Compact design for easy storage
- Wall mounting or mobile use
- Two 60 mm main wheels
- Two 40 mm swivel casters
- Elastic carrying handle
- Power cord length: 18 ft
- Designed for a 120 V North American power supply
- Suitable for detailing professionals and enthusiasts
- Type: Touchless automotive dryer
- Supply voltage: 120 V
- Frequency: 60 Hz
- Rated current: 13 A
- Maximum power: 1600 W
- Motor type: 9538 universal motor
- Motor speed: 18,000 RPM
- Maximum air speed: 350 MPH / 160 m/s
- Maximum airflow: 300 m³/h / 180 CFM
- Hose length when retracted: 7.5 ft / 2.29 m
- Maximum extended hose length: 20 ft / 6.10 m
- Hose inner diameter: 40 mm
- Hose connection: Twist-Lock
- Number of nozzles: 3
- Nozzle types: 16 mm, Venturi, and Duckbill
- Nozzle protection: Overmolded soft trim
- Power cord length: 18 ft / 5.49 m
- Cord gauge: 16 AWG
- Cord type: 2-conductor SJTW
- Electrical plug: UL listed
- Filter: Washable and replaceable E/Z Foam Filter
- Switch: 125 V / 16 A push-button switch, UL approved
- Rated maximum noise level: 75 to 90 dB
- Main wheels: 2 overmolded 60 mm wheels
- Swivel casters: 2 nylon/PU 40 mm casters
- Handle: Elastic
- Installation: Mobile or wall-mounted
The Active S350 Automotive Dryer is a high-performance touchless automotive dryer designed to quickly remove water from vehicle surfaces with a powerful airflow of up to 350 MPH (563 km/h), while reducing the need to use drying towels.
Equipped with a 1600 W motor running at 18,000 RPM, it generates a maximum airflow of 300 m³/h (180 CFM), effectively blowing water off paintwork, wheels, grilles, mirrors, emblems, and exterior trim.
Unlike traditional drying with a microfiber towel, the S350 allows you to dry surfaces without direct contact, reducing the risk of swirl marks caused by dirt particles that could become trapped in a towel.
Its washable and replaceable air filter system helps limit the projection of dust and contaminants during drying. The air slightly warmed by the motor also helps evaporate moisture.
The S350 includes a flexible hose that extends from 7.5 to 20 ft, equipped with a Twist-Lock connection system. It also comes with three interchangeable nozzles, allowing you to adjust the concentration and direction of the airflow for different vehicle surfaces.
Each nozzle features a soft protective trim, designed to reduce the risk of damage in the event of accidental contact with the bodywork.
Its compact design allows for mobile use on casters or wall mounting, depending on your workspace configuration. The two main wheels and two swivel casters make it easy to move around the vehicle, while the wall mount allows you to create a fixed drying station in a garage or workshop.
Operating on a 120 V / 60 Hz power supply, the Active S350 combines power, versatility, and ergonomics to provide a drying solution suitable for both detailing professionals and automotive care enthusiasts.
Result
A fast, precise, and touchless drying process that effectively removes water from large surfaces and hard-to-reach areas while reducing the risk of swirl marks associated with manual drying.
Active S350 Automotive Dryer – Air speeds of up to 350 MPH, 1600 W of power, and a 20 ft reach for professional touchless automotive drying.
- Prepare the vehicle: wash and rinse the vehicle thoroughly to remove soap residue and contaminants before drying.
- Position the dryer: place the S350 on a stable surface or install it on its compatible wall mount.
- Install the hose: connect the flexible hose to the dryer using the Twist-Lock connection mechanism.
- Choose the nozzle: select one of the three included nozzles depending on the surface to be dried and the desired airflow.
- Plug in the unit: connect the 18 ft power cord to an appropriate 120 V / 60 Hz electrical outlet.
- Turn on the dryer: use the push-button switch to start the motor.
- Dry the surfaces: direct the airflow over the bodywork using controlled movements to gradually blow away the water.
- Treat hard-to-reach areas: use an appropriate nozzle to remove water accumulated in mirrors, grilles, emblems, seals, and trim.
- Finish drying: check areas that may retain water and make additional passes as needed.
- Store the equipment: turn off the dryer, unplug the power supply, and allow the unit to cool before storing.
Important: Never direct the airflow toward eyes, people, or animals. Avoid using the unit in standing water or under direct exposure to water. Keep the air intakes clear and regularly check the condition of the filter. Observe the electrical requirements of the unit, especially its 120 V power supply and 13 A rated current.
Maintenance and Storage
Regularly clean the dryer and its filtration system to maintain optimal airflow and extend the life of the equipment.
- Periodically remove and clean the washable foam filter.
- Allow the filter to dry completely before reinstalling it.
- Replace the filter when it becomes damaged or excessively worn.
- Check that the air inlets and outlets remain clear.
- Clean the nozzles and inspect their soft protective trims.
- Check the condition of the flexible hose and its Twist-Lock mechanism.
- Regularly inspect the power cord.
- Clean the wheels and casters to maintain good mobility.
- Allow the unit to cool before storing it.
- Store the dryer in a clean, dry environment protected from freezing.
- Professional touchless
- Maximum air speed of 350 MPH / 563 km/h
- Powerful 1600 W
- Motor speed of 18,000 RPM
- Maximum airflow of 300 m³/h / 180 CFM
- Dries bodywork without direct contact
- Reduces the risk of swirl marks caused by using contaminated towels
- Ideal for removing water from hard-to-reach areas
- Filtered air for clean drying
- Washable and replaceable foam filter
- Flexible hose extends up to 20 ft
- Hose length when retracted: 7.5 ft
- Hose connection with Twist-Lock
- 3 interchangeable nozzles included
- 16 mm precision nozzle
- Venturi nozzle
- Flat Duckbill nozzle
- Quick nozzle-to-hose connection
- Soft protective trims on the nozzles
- Compact design for easy storage
- Wall mounting or mobile use
- Two 60 mm main wheels
- Two 40 mm swivel casters
- Elastic carrying handle
- Power cord length: 18 ft
- Designed for a 120 V North American power supply
- Suitable for detailing professionals and enthusiasts
- Type: Touchless automotive dryer
- Supply voltage: 120 V
- Frequency: 60 Hz
- Rated current: 13 A
- Maximum power: 1600 W
- Motor type: 9538 universal motor
- Motor speed: 18,000 RPM
- Maximum air speed: 350 MPH / 160 m/s
- Maximum airflow: 300 m³/h / 180 CFM
- Hose length when retracted: 7.5 ft / 2.29 m
- Maximum extended hose length: 20 ft / 6.10 m
- Hose inner diameter: 40 mm
- Hose connection: Twist-Lock
- Number of nozzles: 3
- Nozzle types: 16 mm, Venturi, and Duckbill
- Nozzle protection: Overmolded soft trim
- Power cord length: 18 ft / 5.49 m
- Cord gauge: 16 AWG
- Cord type: 2-conductor SJTW
- Electrical plug: UL listed
- Filter: Washable and replaceable E/Z Foam Filter
- Switch: 125 V / 16 A push-button switch, UL approved
- Rated maximum noise level: 75 to 90 dB
- Main wheels: 2 overmolded 60 mm wheels
- Swivel casters: 2 nylon/PU 40 mm casters
- Handle: Elastic
- Installation: Mobile or wall-mounted
Product title
Vendor
$19.99 | $24.99
Product title
Vendor
$19.99 | $24.99
Product title
Vendor
$19.99 | $24.99
Product title
Vendor
