NOTE: During the transition period to new CARPRO 2026 labels, the product is currently being shipped with previous packaging.
Spotless 2.0 utilizes an improved chemical formula with stronger acids to break down mineral deposits on the surface before they can etch into the finish, eliminating the need for tedious polishing, thus extending the life of the paint film.
Spotless's proprietary blend of carefully balanced acids safely breaks down mineral deposits on most hard materials and can even be used on CQUARTZ coatings, helping you keep your vehicle spotless.
Spotless 2.0 is essential for preparing matte paint for coating and/or maintenance.
WARNING
Do NOT use in direct sun.
Do NOT use on a hot surface.
Do NOT spray directly on glass. Use with care, polish, and remove instantly and neutralize.
- New updated formula with stronger acids
- Effectively breaks down mineral deposits
- Can be safely used on a variety of surfaces
Paint:
- Wash vehicle with Reset, rinse, and dry paint.
- Work indoors or in the shade on cool panels. Prepare 2 damp terry towels.
- Spray Spotless 2.0 directly onto the panel or into 1 damp terry towel and spread onto the affected area.
- Allow 30 seconds to 1 minute for Spotless 2.0 to break down surface minerals before wiping affected area to help loosen mineral deposits.
- Do not allow chemical to dry on the surface, wipe with a 2nd damp terry towel or re-apply Spotless 2.0.
- Repeat as needed.
- After cleaning each panel, rinse thoroughly with running water and dry before moving to the next panel.
Emblems & Wheels:
- Clean area with Reset, rinse, and dry surface.
- Always test an inconspicuous area first. Spray Spotless 2.0 onto an applicator, microfiber, or brush of your choice and apply to the affected area 1 section at a time.
- Allow Spotless 2.0 to dwell on the affected area for 30 seconds to 1 minute without allowing it to dry before agitating to help break up mineral deposits or etching.
- Repeat as needed.
- Rinse thoroughly with running water after cleaning each area and dry.
Textured plastics:
- Clean plastics with Reset, rinse, and dry.
- Spray Spotless 2.0 directly onto the textured plastic or apply to a damp microfiber towel and wipe liberally onto the surface to allow it to penetrate the pores.
- Allow Spotless 2.0 to dwell for 30 seconds to 1 minute to break down mineral deposits and contamination before using a trim brush to agitate and remove contamination from the pores.
- Repeat as needed.
Rinse thoroughly with running water after cleaning each section and dry.
Glass:
- Apply Spotless 2.0 to a terry towel and spread onto the glass allowing to dwell for 30 seconds to 1 minute.
- Use the same terry towel to buff the glass to agitate minerals or for stubborn water spots, apply a small amount of Spotless 2.0 to a polishing pad and machine or hand polish the glass.
- After removing spots, thoroughly rinse glass and adjacent panels with running water or wash with car shampoo and dry.
NOTE: During the transition period to new CARPRO 2026 labels, the product is currently being shipped with previous packaging.
Spotless 2.0 utilizes an improved chemical formula with stronger acids to break down mineral deposits on the surface before they can etch into the finish, eliminating the need for tedious polishing, thus extending the life of the paint film.
Spotless's proprietary blend of carefully balanced acids safely breaks down mineral deposits on most hard materials and can even be used on CQUARTZ coatings, helping you keep your vehicle spotless.
Spotless 2.0 is essential for preparing matte paint for coating and/or maintenance.
WARNING
Do NOT use in direct sun.
Do NOT use on a hot surface.
Do NOT spray directly on glass. Use with care, polish, and remove instantly and neutralize.
- New updated formula with stronger acids
- Effectively breaks down mineral deposits
- Can be safely used on a variety of surfaces
Paint:
- Wash vehicle with Reset, rinse, and dry paint.
- Work indoors or in the shade on cool panels. Prepare 2 damp terry towels.
- Spray Spotless 2.0 directly onto the panel or into 1 damp terry towel and spread onto the affected area.
- Allow 30 seconds to 1 minute for Spotless 2.0 to break down surface minerals before wiping affected area to help loosen mineral deposits.
- Do not allow chemical to dry on the surface, wipe with a 2nd damp terry towel or re-apply Spotless 2.0.
- Repeat as needed.
- After cleaning each panel, rinse thoroughly with running water and dry before moving to the next panel.
Emblems & Wheels:
- Clean area with Reset, rinse, and dry surface.
- Always test an inconspicuous area first. Spray Spotless 2.0 onto an applicator, microfiber, or brush of your choice and apply to the affected area 1 section at a time.
- Allow Spotless 2.0 to dwell on the affected area for 30 seconds to 1 minute without allowing it to dry before agitating to help break up mineral deposits or etching.
- Repeat as needed.
- Rinse thoroughly with running water after cleaning each area and dry.
Textured plastics:
- Clean plastics with Reset, rinse, and dry.
- Spray Spotless 2.0 directly onto the textured plastic or apply to a damp microfiber towel and wipe liberally onto the surface to allow it to penetrate the pores.
- Allow Spotless 2.0 to dwell for 30 seconds to 1 minute to break down mineral deposits and contamination before using a trim brush to agitate and remove contamination from the pores.
- Repeat as needed.
Rinse thoroughly with running water after cleaning each section and dry.
Glass:
- Apply Spotless 2.0 to a terry towel and spread onto the glass allowing to dwell for 30 seconds to 1 minute.
- Use the same terry towel to buff the glass to agitate minerals or for stubborn water spots, apply a small amount of Spotless 2.0 to a polishing pad and machine or hand polish the glass.
- After removing spots, thoroughly rinse glass and adjacent panels with running water or wash with car shampoo and dry.
20%
Product title
Vendor
$19.99 | $24.99
Product title
Vendor
$19.99 | $24.99
Product title
Vendor
$19.99 | $24.99
Product title
Vendor
