Spotless 2.0 uses an improved chemical formula with stronger acids to break down mineral deposits on the surface before they can etch into the finish, removing the need for tedious polishing, thus extending the life of the paint film.
Spotless’ proprietary blend of carefully balanced acids safely breaks down mineral deposits on most hard materials and can even be used on CQUARTZ coatings, helping you keep your vehicle spotless.
Spotless 2.0 is essential for preparing matte paint for coating and/or maintenance.
WARNINGS
DO NOT use in the sun.
DO NOT use on a hot surface.
DO NOT spray directly onto glass. Use with care, buff, and remove instantly and neutralize.
- New updated formula with stronger acids
- Effectively breaks down mineral deposits
- Can be safely used on a variety of surfaces
Paint:
- Wash vehicle with Reset, rinse, and dry paint.
- Work indoors or in the shade on cool panels. Prepare 2 damp terry towels.
- Spray Spotless 2.0 directly on the panel or into 1 damp terry towel and spread onto the affected area.
- Wait 30 seconds to 1 minute for Spotless 2.0 to break down surface minerals before wiping the affected area to help loosen mineral deposits.
- Do not allow the chemical to dry on the surface, wipe with a 2nd damp terry towel or reapply Spotless 2.0.
- Repeat if necessary.
- After cleaning each panel, rinse thoroughly with running water and dry before moving to the next panel.
Emblems & Wheels:
- Clean the area with Reset, rinse, and dry the surface.
- Always test in an inconspicuous area first. Spray Spotless 2.0 onto an applicator, microfiber, or brush of your choice and apply to the affected area 1 section at a time.
- Allow Spotless 2.0 to dwell on the affected area for 30 seconds to 1 minute without allowing it to dry before agitating to help break up the mineral deposits or stains.
- Repeat if necessary.
- Rinse thoroughly with running water after cleaning each area and dry.
Textured Plastics:
- Clean plastics with Reset, rinse, and dry.
- Spray Spotless 2.0 directly onto the textured plastic or apply it to a damp microfiber towel and wipe it liberally onto the surface to allow it to penetrate the pores.
- Allow Spotless 2.0 to dwell for 30 seconds to 1 minute to break down mineral deposits and contamination before using a trim brush to agitate and remove contamination from the pores.
- Repeat if necessary.
Rinse thoroughly with running water after cleaning each section and dry.
Glass:
- Apply Spotless 2.0 onto a terry towel and spread onto the glass allowing it to dwell for 30 seconds to 1 minute.
- Use the same terry towel to buff the glass to agitate minerals or for stubborn water spots, apply a little Spotless 2.0 to a polishing pad and machine polish or hand polish the glass.
- After removing stains, rinse glass and adjacent panels thoroughly with running water or wash with car shampoo and dry.
Spotless 2.0 uses an improved chemical formula with stronger acids to break down mineral deposits on the surface before they can etch into the finish, removing the need for tedious polishing, thus extending the life of the paint film.
Spotless’ proprietary blend of carefully balanced acids safely breaks down mineral deposits on most hard materials and can even be used on CQUARTZ coatings, helping you keep your vehicle spotless.
Spotless 2.0 is essential for preparing matte paint for coating and/or maintenance.
WARNINGS
DO NOT use in the sun.
DO NOT use on a hot surface.
DO NOT spray directly onto glass. Use with care, buff, and remove instantly and neutralize.
- New updated formula with stronger acids
- Effectively breaks down mineral deposits
- Can be safely used on a variety of surfaces
Paint:
- Wash vehicle with Reset, rinse, and dry paint.
- Work indoors or in the shade on cool panels. Prepare 2 damp terry towels.
- Spray Spotless 2.0 directly on the panel or into 1 damp terry towel and spread onto the affected area.
- Wait 30 seconds to 1 minute for Spotless 2.0 to break down surface minerals before wiping the affected area to help loosen mineral deposits.
- Do not allow the chemical to dry on the surface, wipe with a 2nd damp terry towel or reapply Spotless 2.0.
- Repeat if necessary.
- After cleaning each panel, rinse thoroughly with running water and dry before moving to the next panel.
Emblems & Wheels:
- Clean the area with Reset, rinse, and dry the surface.
- Always test in an inconspicuous area first. Spray Spotless 2.0 onto an applicator, microfiber, or brush of your choice and apply to the affected area 1 section at a time.
- Allow Spotless 2.0 to dwell on the affected area for 30 seconds to 1 minute without allowing it to dry before agitating to help break up the mineral deposits or stains.
- Repeat if necessary.
- Rinse thoroughly with running water after cleaning each area and dry.
Textured Plastics:
- Clean plastics with Reset, rinse, and dry.
- Spray Spotless 2.0 directly onto the textured plastic or apply it to a damp microfiber towel and wipe it liberally onto the surface to allow it to penetrate the pores.
- Allow Spotless 2.0 to dwell for 30 seconds to 1 minute to break down mineral deposits and contamination before using a trim brush to agitate and remove contamination from the pores.
- Repeat if necessary.
Rinse thoroughly with running water after cleaning each section and dry.
Glass:
- Apply Spotless 2.0 onto a terry towel and spread onto the glass allowing it to dwell for 30 seconds to 1 minute.
- Use the same terry towel to buff the glass to agitate minerals or for stubborn water spots, apply a little Spotless 2.0 to a polishing pad and machine polish or hand polish the glass.
- After removing stains, rinse glass and adjacent panels thoroughly with running water or wash with car shampoo and dry.
Product title
Vendor
$19.99 | $24.99
Product title
Vendor
$19.99 | $24.99
Product title
Vendor
$19.99 | $24.99
Product title
Vendor
