Save 15%

RUPES - Carbon Brush (Replacement Brushes) - PACK OF 2

$12.71 $14.95 Save $2.24

Shipping calculated at checkout

RUPES Carbon Brushes: pack of 2 replacement carbon brushes to maintain and restore the operation of compatible polisher motors.

In stock!

Shippied today if ordered before 3PM.

The RUPES Carbon Brushes are replacement parts designed for the maintenance and repair of compatible RUPES polisher electric motors.

Also known as carbon brushes, these parts ensure electrical contact between the fixed and rotating components of the motor, allowing the transmission of the current necessary for its operation.

Over time and with hours of use, carbon brushes naturally wear out. Excessive wear can lead to irregular operation, motor interruptions, or loss of performance, requiring their inspection and replacement.

Replacing worn brushes helps to restore proper electrical contact and maintain the proper operation of the motor, when brush wear is indeed the cause of the problem.

These RUPES replacement parts allow for targeted maintenance without having to replace the entire polisher.

Sold in a pack of 2 brushes, they provide a practical solution for detailing shops, paint correction professionals, and users who wish to maintain their equipment.

Result

A properly maintained electric motor, with new carbon brushes restoring reliable electrical contact, subject to compatibility and the proper condition of the other components.

RUPES Carbon Brushes – Two small essential parts to keep your polisher in service.

  1. Unplug the polisher: ensure that the device is completely disconnected from any power supply.
  2. Check compatibility: confirm that the part number RUPES 47.105 matches the polisher model to be serviced.
  3. Access the motor: follow the disassembly procedure provided in the manufacturer's technical documentation.
  4. Remove the worn brushes: remove the old carbon brushes while respecting their fastening system.
  5. Inspect the components: check the condition of the brush holders and the motor's contact surfaces.
  6. Install the new brushes: replace both brushes according to the applicable technical instructions.
  7. Reassemble the device: correctly reinstall the removed components and guards.
  8. Check operation: perform the checks and tests prescribed by RUPES before putting the polisher back into service.

Important: Replacing the carbon brushes involves working on the electric motor. It must be performed by a qualified person, in accordance with RUPES repair procedures.

Never work on a plugged-in polisher. A motor failure can also stem from other components; replacing the brushes does not guarantee the resolution of all electrical problems.

Maintenance and Storage

To preserve the proper operation of the carbon brushes and the motor:

  • Inspect the brushes when signs of wear or irregular operation appear.
  • Check their condition according to RUPES maintenance recommendations.
  • Replace worn brushes with compatible parts.
  • Inspect the brush holders and contact surfaces during the intervention.
  • Avoid excessive dust accumulation in the polisher's ventilation openings.
  • Store the replacement brushes in a clean and dry place.
  • Protect the parts from impacts and contamination before installation.
  • RUPES replacement carbon brushes
  • Sold in a pack of 2
  • Designed for compatible electric motors
  • Replaceable wear parts
  • Restore electrical contact when brushes are worn
  • Contribute to motor maintenance
  • Suitable for repair work
  • Targeted replacement solution
  • Installation requires prior compatibility verification
  • Manufacturer part number 47.105
  • Suitable for repair and detailing shops

1. What are carbon brushes used for in a RUPES polisher?

The carbon brushes transmit electrical current to the rotating components of the motor. They ensure contact essential for the operation of certain electric motors and gradually wear out during use.

2. How do you know if the carbon brushes need to be replaced?

Operating interruptions, loss of performance, or irregular motor behavior may indicate worn brushes. However, these symptoms can also stem from other components. An inspection is necessary to confirm the cause of the problem.

3. How many brushes are included in the pack?

Centre de l'Auto Élégance sells this product in a pack of 2 carbon brushes. 

4. Are these brushes compatible with all RUPES polishers?

No. Compatibility depends on the exact polisher model and the required part number. It is important to check that RUPES part number 47.105 matches your device before ordering.

5. Can you replace the carbon brushes yourself?

Replacement requires accessing the internal components of the electric motor. It is recommended to entrust this work to a qualified person, following RUPES technical procedures. Incorrect installation can damage the motor or compromise the safety of the device.

The RUPES Carbon Brushes are replacement parts designed for the maintenance and repair of compatible RUPES polisher electric motors.

Also known as carbon brushes, these parts ensure electrical contact between the fixed and rotating components of the motor, allowing the transmission of the current necessary for its operation.

Over time and with hours of use, carbon brushes naturally wear out. Excessive wear can lead to irregular operation, motor interruptions, or loss of performance, requiring their inspection and replacement.

Replacing worn brushes helps to restore proper electrical contact and maintain the proper operation of the motor, when brush wear is indeed the cause of the problem.

These RUPES replacement parts allow for targeted maintenance without having to replace the entire polisher.

Sold in a pack of 2 brushes, they provide a practical solution for detailing shops, paint correction professionals, and users who wish to maintain their equipment.

Result

A properly maintained electric motor, with new carbon brushes restoring reliable electrical contact, subject to compatibility and the proper condition of the other components.

RUPES Carbon Brushes – Two small essential parts to keep your polisher in service.

  1. Unplug the polisher: ensure that the device is completely disconnected from any power supply.
  2. Check compatibility: confirm that the part number RUPES 47.105 matches the polisher model to be serviced.
  3. Access the motor: follow the disassembly procedure provided in the manufacturer's technical documentation.
  4. Remove the worn brushes: remove the old carbon brushes while respecting their fastening system.
  5. Inspect the components: check the condition of the brush holders and the motor's contact surfaces.
  6. Install the new brushes: replace both brushes according to the applicable technical instructions.
  7. Reassemble the device: correctly reinstall the removed components and guards.
  8. Check operation: perform the checks and tests prescribed by RUPES before putting the polisher back into service.

Important: Replacing the carbon brushes involves working on the electric motor. It must be performed by a qualified person, in accordance with RUPES repair procedures.

Never work on a plugged-in polisher. A motor failure can also stem from other components; replacing the brushes does not guarantee the resolution of all electrical problems.

Maintenance and Storage

To preserve the proper operation of the carbon brushes and the motor:

  • Inspect the brushes when signs of wear or irregular operation appear.
  • Check their condition according to RUPES maintenance recommendations.
  • Replace worn brushes with compatible parts.
  • Inspect the brush holders and contact surfaces during the intervention.
  • Avoid excessive dust accumulation in the polisher's ventilation openings.
  • Store the replacement brushes in a clean and dry place.
  • Protect the parts from impacts and contamination before installation.
  • RUPES replacement carbon brushes
  • Sold in a pack of 2
  • Designed for compatible electric motors
  • Replaceable wear parts
  • Restore electrical contact when brushes are worn
  • Contribute to motor maintenance
  • Suitable for repair work
  • Targeted replacement solution
  • Installation requires prior compatibility verification
  • Manufacturer part number 47.105
  • Suitable for repair and detailing shops

1. What are carbon brushes used for in a RUPES polisher?

The carbon brushes transmit electrical current to the rotating components of the motor. They ensure contact essential for the operation of certain electric motors and gradually wear out during use.

2. How do you know if the carbon brushes need to be replaced?

Operating interruptions, loss of performance, or irregular motor behavior may indicate worn brushes. However, these symptoms can also stem from other components. An inspection is necessary to confirm the cause of the problem.

3. How many brushes are included in the pack?

Centre de l'Auto Élégance sells this product in a pack of 2 carbon brushes. 

4. Are these brushes compatible with all RUPES polishers?

No. Compatibility depends on the exact polisher model and the required part number. It is important to check that RUPES part number 47.105 matches your device before ordering.

5. Can you replace the carbon brushes yourself?

Replacement requires accessing the internal components of the electric motor. It is recommended to entrust this work to a qualified person, following RUPES technical procedures. Incorrect installation can damage the motor or compromise the safety of the device.