The CARPRO TyreBrush is a cleaning brush designed to remove embedded dirt, road residue, and old layers of dressing accumulated on tires, ensuring a clean and properly prepared surface before applying a protection.
Its mechanical action allows you to work the tire sidewalls and their textured surfaces, especially the grooves, raised lettering, and areas where contaminants tend to accumulate.
Used with a suitable tire cleaner, such as CARPRO ReTyre, it helps remove contaminants and residues responsible for the browning of the rubber. Brushing promotes the penetration of the cleaner into the textures and helps achieve a more uniform cleaning.
The TyreBrush is particularly useful before applying a dressing or protective coating, especially CARPRO PERL 2.0 or DarkSide, as a properly cleaned surface is an essential step in preparation.
Suitable for regular cleaning and thorough preparation, it is a practical accessory for detailing professionals and enthusiasts seeking effective tire maintenance.
Result
Tires deeply cleaned, free of accumulated residues, and properly prepared to receive a dressing or protective coating.
CARPRO TyreBrush – Targeted brushing action to clean the rubber and prepare your tires for a uniform finish.
- Prepare the vehicle: park on a suitable surface and ensure that the tires are sufficiently cooled before cleaning.
- Perform an initial rinse: rinse the tires with water to remove loose dirt and contaminants.
- Apply the cleaner: spray a compatible tire cleaner, such as CARPRO ReTyre, onto the sidewalls.
- Let it work: follow the dwell time recommended by the cleaner manufacturer. For CARPRO ReTyre, let it work for approximately 30 seconds.
- Brush the tires: work the surface with the CARPRO TyreBrush, paying special attention to the grooves, lettering, and heavily contaminated areas.
- Rinse thoroughly: completely remove the cleaner residues and dislodged dirt, then rinse the brush.
- Repeat as needed: perform another cleaning if the tires still show significant residues. With ReTyre, CARPRO recommends repeating until the foam remains white.
- Dry the tires: allow the surfaces to dry completely before applying a compatible dressing or protective coating.
Important: The CARPRO TyreBrush is intended for cleaning tires. Avoid using it on painted surfaces, delicate rims, or materials that may be marked by brushing. Do not allow the cleaner to dry on the surfaces.
Care and Storage
To maintain the effectiveness of the CARPRO TyreBrush and prevent the transfer of contaminants between uses, clean the brush regularly.
- Rinse the bristles thoroughly after each use.
- Remove cleaner residues and dirt particles.
- Inspect the bristles before each cleaning.
- Remove abrasive contaminants that may be trapped in the brush.
- Allow to dry completely in the open air.
- Avoid leaving the brush submerged in a chemical solution for an extended period.
- Store in a clean, dry place.
- Ideally, reserve the brush for tire cleaning to avoid cross-contamination.
- Brush designed for automotive tire cleaning
- Promotes the removal of embedded dirt
- Allows you to work the textured surfaces of the rubber
- Facilitates the cleaning of lettering and sidewall textures
- Helps remove residues of old dressings
- Helps remove contaminants responsible for browning
- Usable with a compatible tire cleaner
- Suitable for maintenance cleaning and thorough preparation
- Practical before applying a tire dressing
- Facilitates preparation before a protective coating
- Easy cleaning and maintenance after use
- Suitable for detailing professionals and enthusiasts
- Type: Tire cleaning brush
- Main function: Mechanical cleaning of rubber
- Targeted surfaces: Tire sidewalls and textured surfaces
- Targeted contaminants: Road dirt, residues of old dressings, and accumulated contaminants
- Use: Manual
- Recommended cleaner: CARPRO ReTyre
- Preparation before protection: CARPRO PERL 2.0 and DarkSide
- Care: Rinsing and drying after use
Recommended Applications
- Cleaning tire sidewalls
- Removal of road dirt
- Cleaning raised lettering
- Cleaning textured rubber surfaces
- Removal of residues of old dressings
- Preparation before CARPRO PERL 2.0
- Preparation before CARPRO DarkSide
- Regular tire cleaning
- Thorough tire preparation
- Automotive detailing centers
- Professional detailing shops
1. What is the CARPRO TyreBrush used for?
The CARPRO TyreBrush is intended for the mechanical cleaning of tires. It allows you to brush the sidewalls to dislodge dirt, road residues, and contaminants accumulated in the textures of the rubber.
2. Can the CARPRO TyreBrush be used with CARPRO ReTyre?
Yes. The TyreBrush can be used with CARPRO ReTyre, a cleaner specially formulated to remove contaminants, old dressings, and residues responsible for the browning of tires. Brushing contributes to the action of the cleaner on textured surfaces.
3. Can the CARPRO TyreBrush help remove tire browning?
Yes. Used with a suitable cleaner, it helps dislodge contaminants and residues responsible for the brownish discoloration of the rubber. The result depends on the condition of the tires and the cleaning product used.
4. Can the CARPRO TyreBrush be used on rims?
It is preferable to reserve the TyreBrush for tires. For rims, especially those with delicate finishes, use a brush specially designed for wheel surfaces to limit the risk of marks.
5. Why clean tires before applying a dressing or protective coating?
Thorough cleaning helps remove residues of old products, dirt, and accumulated contaminants. A clean and dry surface promotes a more uniform application of products such as CARPRO PERL 2.0 or DarkSide , in accordance with their respective instructions.
The CARPRO TyreBrush is a cleaning brush designed to remove embedded dirt, road residue, and old layers of dressing accumulated on tires, ensuring a clean and properly prepared surface before applying a protection.
Its mechanical action allows you to work the tire sidewalls and their textured surfaces, especially the grooves, raised lettering, and areas where contaminants tend to accumulate.
Used with a suitable tire cleaner, such as CARPRO ReTyre, it helps remove contaminants and residues responsible for the browning of the rubber. Brushing promotes the penetration of the cleaner into the textures and helps achieve a more uniform cleaning.
The TyreBrush is particularly useful before applying a dressing or protective coating, especially CARPRO PERL 2.0 or DarkSide, as a properly cleaned surface is an essential step in preparation.
Suitable for regular cleaning and thorough preparation, it is a practical accessory for detailing professionals and enthusiasts seeking effective tire maintenance.
Result
Tires deeply cleaned, free of accumulated residues, and properly prepared to receive a dressing or protective coating.
CARPRO TyreBrush – Targeted brushing action to clean the rubber and prepare your tires for a uniform finish.
- Prepare the vehicle: park on a suitable surface and ensure that the tires are sufficiently cooled before cleaning.
- Perform an initial rinse: rinse the tires with water to remove loose dirt and contaminants.
- Apply the cleaner: spray a compatible tire cleaner, such as CARPRO ReTyre, onto the sidewalls.
- Let it work: follow the dwell time recommended by the cleaner manufacturer. For CARPRO ReTyre, let it work for approximately 30 seconds.
- Brush the tires: work the surface with the CARPRO TyreBrush, paying special attention to the grooves, lettering, and heavily contaminated areas.
- Rinse thoroughly: completely remove the cleaner residues and dislodged dirt, then rinse the brush.
- Repeat as needed: perform another cleaning if the tires still show significant residues. With ReTyre, CARPRO recommends repeating until the foam remains white.
- Dry the tires: allow the surfaces to dry completely before applying a compatible dressing or protective coating.
Important: The CARPRO TyreBrush is intended for cleaning tires. Avoid using it on painted surfaces, delicate rims, or materials that may be marked by brushing. Do not allow the cleaner to dry on the surfaces.
Care and Storage
To maintain the effectiveness of the CARPRO TyreBrush and prevent the transfer of contaminants between uses, clean the brush regularly.
- Rinse the bristles thoroughly after each use.
- Remove cleaner residues and dirt particles.
- Inspect the bristles before each cleaning.
- Remove abrasive contaminants that may be trapped in the brush.
- Allow to dry completely in the open air.
- Avoid leaving the brush submerged in a chemical solution for an extended period.
- Store in a clean, dry place.
- Ideally, reserve the brush for tire cleaning to avoid cross-contamination.
- Brush designed for automotive tire cleaning
- Promotes the removal of embedded dirt
- Allows you to work the textured surfaces of the rubber
- Facilitates the cleaning of lettering and sidewall textures
- Helps remove residues of old dressings
- Helps remove contaminants responsible for browning
- Usable with a compatible tire cleaner
- Suitable for maintenance cleaning and thorough preparation
- Practical before applying a tire dressing
- Facilitates preparation before a protective coating
- Easy cleaning and maintenance after use
- Suitable for detailing professionals and enthusiasts
- Type: Tire cleaning brush
- Main function: Mechanical cleaning of rubber
- Targeted surfaces: Tire sidewalls and textured surfaces
- Targeted contaminants: Road dirt, residues of old dressings, and accumulated contaminants
- Use: Manual
- Recommended cleaner: CARPRO ReTyre
- Preparation before protection: CARPRO PERL 2.0 and DarkSide
- Care: Rinsing and drying after use
Recommended Applications
- Cleaning tire sidewalls
- Removal of road dirt
- Cleaning raised lettering
- Cleaning textured rubber surfaces
- Removal of residues of old dressings
- Preparation before CARPRO PERL 2.0
- Preparation before CARPRO DarkSide
- Regular tire cleaning
- Thorough tire preparation
- Automotive detailing centers
- Professional detailing shops
1. What is the CARPRO TyreBrush used for?
The CARPRO TyreBrush is intended for the mechanical cleaning of tires. It allows you to brush the sidewalls to dislodge dirt, road residues, and contaminants accumulated in the textures of the rubber.
2. Can the CARPRO TyreBrush be used with CARPRO ReTyre?
Yes. The TyreBrush can be used with CARPRO ReTyre, a cleaner specially formulated to remove contaminants, old dressings, and residues responsible for the browning of tires. Brushing contributes to the action of the cleaner on textured surfaces.
3. Can the CARPRO TyreBrush help remove tire browning?
Yes. Used with a suitable cleaner, it helps dislodge contaminants and residues responsible for the brownish discoloration of the rubber. The result depends on the condition of the tires and the cleaning product used.
4. Can the CARPRO TyreBrush be used on rims?
It is preferable to reserve the TyreBrush for tires. For rims, especially those with delicate finishes, use a brush specially designed for wheel surfaces to limit the risk of marks.
5. Why clean tires before applying a dressing or protective coating?
Thorough cleaning helps remove residues of old products, dirt, and accumulated contaminants. A clean and dry surface promotes a more uniform application of products such as CARPRO PERL 2.0 or DarkSide , in accordance with their respective instructions.
Product title
Vendor
$19.99 | $24.99
Product title
Vendor
$19.99 | $24.99
Product title
Vendor
$19.99 | $24.99
Product title
Vendor
